Unify OpenScape CP400 - Programming function keys; Set up function keys

Programming function keys 67
Programming function keys
You can assign frequently used functions or phone numbers to the function keys
of your OpenScape Desk Phone CP400 or to the Key Module KM400.
Set up function keys.
Example: Configure a second call
Hold down the Function keys of the phone or of the OpenScape Key Module
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
€ Select "Assign telephone function"
Confirm.
Confirm.
€ Select "Second call/Call waiting"
Confirm.
Confirm. The key is programmed.
The selection of available functions depends on the configuration. Please
ask your administrator if you are missing a function.
_
Assign telephone function
-
_
Change
_
Second call/Call waiting
-
_
Save
_