Unify OpenScape CP400 - Secure calls; Query status in idle mode; Querying the status when connected; Information about secure calls

Private / Security 141
Secure calls
Query status in idle mode
When the phone is idle, you can check whether the secure calling is active on
your phone.
€ Open the idle menu  page 22.
Select and confirm.
The status display corresponding to the set security mode is displayed.
A connection is only encrypted if the other side also supports the encryption.
or
Connections are always encrypted.
Querying the status when connected
During the call you can query whether your call is secure.
Select.
The call is secure.
or
The call is not secure.
Information about secure calls
The responsible administrator can determine in your communication system
whether and how you are notified of unencrypted calls.
Z Warning tone.
and/or
Display screen.
Use secure calls? f
enabled
Always enabled
If the entry "Use secure calls?" appears in the idle menu, the function is
not activated.
Use secure calls? m
Call encrypted
Call not encrypted
Call not encrypted