2
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
Table of Contents
1.0 - Welcome / Warnings / Cautions / Warranty 5
1.1 - User’s Guide Nomenclature - Notes & Warnings 5
2.0 - Getting to Know Your SP2100 6
2.1 - What’s in the Box… 6
2.2 - Parts of the UnionNet SP2100 6
2.3 - Charging your SP2100 7
2.4 - SP2100 Power Modes 7
2.5 - The SP2100 Status Bar 8
2.6 - Scanning Barcodes with the SP21002D 8
2.6.1 - Scan Barcodes from the screen of a PC, Tablet or Smart Phone with the SP21002D 9
2.7- Scanning Barcodes using a SP21001D Laser Scanner 10
2.8- Using the System Menu of the SP2100 11
2.9- System Menu - Reset Factory Defaults 11
2.8.1 System Menu Notation for the SP2100 11
2.10- BLUETOOTH CONNECTION TYPES - Revisiting the SP2100 Status Bar 12
3.0 - Getting Started with HID Connections 12
3.3 - Windows HID Connection Instructions 14
3.4 - Mac HID Connection Instructions 15
3.5 - HID Tips & Tricks with the SP2100 16
3.7 - Disconnecting / Reconnecting Bluetooth 17
3.8 - Bluetooth HID - Setting Transmission Delays 18
3.9 - HID Batch Data from the SP2100 to Host 18
3.10 - Other Common System Menu Options for Bluetooth 18
4.0 - Managing Memory 19
4.1 - Storage & Transmit Modes 19
4.3 - Stored Data - Review with Side Buttons 20
4.4 - Stored Data - Delete All Data with System Menu 20
4.2 -Display Memory Used 20
5.0 - Data Formatting 20
5.1 - Introduction to Suffixes and Prefixes 20
5.2- Using a Custom Suffix - Stating an Example 20
5.3- Default Suffix and Introduction to ASCII & Hexdecimal Equivalents 21
5.4- SP2100 System Menu for Pre/Suffix - The Carriage Return Suffix 21
5.5- Using a Custom Suffix - Using the ASCII-HEX Conversion Table 22
5.6 - Using a Custom Suffix - Design the ASCII / HEX for the Section 5.2 Example 22
5.7 - Test the Suffix Settings from the Section 5.6 Design 22
5.8 - Summarizing Custom Prefixes and Suffixes 23
6.0- SP2100 Factory Defaults 23
7.0 - Barcode Symbologies - Setup Barcodes 23
7.1 - Why are there Barcode Symbology Setup Options? 23
APPENDIX A - ASCII TO Hex Decimal Conversion 24
APPENDIX B - SP2100 2D Imager Setup Barcodes 25
B.1 - Method of programming the SP2100 2D Imager decoder with Setup Barcodes 25
B.2 - General Options 25
To Next Page
Loading...
Need help?
General