UnionNet SP2100 - Uk;Plessey (Code ID: U)

APPENDIX C - SP2100 1D LASER Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
1D LASER ONLY
53
Programming “OFF” Programming “OFF”
C.7 - Code 39 (Code 32, Trioptic Code 39), con’t
Set Max Length
(00-99) Default=99
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Enable TriOptic
Code39
Programming “ON”
Programming “OFF”
Disable TriOptic
Code39
Programming “ON”
Enable TriOptic
Code39 Start/Stop
Programming “ON”
Programming “ON”
Programming “OFF”
Set Min Length
(00-99) Default=01
Disable TriOptic
Code39 Start/Stop
Scan 2 digits from
Section C.A1
Scan 2 digits from
Section C.A1
Programming “OFF” Programming “OFF”
C.8 - UK/Plessey (Code ID: U)
Programming “ON”
Programming “OFF”
Disable UK/Plessey
Programming “ON”
Enable Check Digit
Programming “ON”
Disable Check Digit
Programming “ON”
Programming “OFF”
Disable Transmit
Check Digit
Enable Transmit
Check Digit
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Enable UK/Plessey
Set Max Length
(00-99) Default=99
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Set Min Length
(00-99) Default=01
Scan 2 digits from
Section C.A1
Scan 2 digits from
Section C.A1