UnionNet SP2100 - Codeabar (Code ID: N)

APPENDIX C - SP2100 1D LASER Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
1D LASER ONLY
56
Programming “OFF” Programming “OFF”
Start/End Character
Type - ABCD/ABCD
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Start/End Character
Type - abcd/abcd
Enable Start/
End Transmit
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Disable Start/
End Transmit
C.13 - Codeabar (Code ID: N)
Programming “ON”
Programming “OFF”
Disable Codabar
Programming “ON”
Enable Check Digit
Programming “ON”
Disable Check Digit
Programming “ON”
Programming “OFF”
Disable Transmit
Check Digit
Programming “ON”
Programming “OFF”
Start/End Character
Type - abcd/tn*e
Programming “ON”
Programming “OFF”
Disable Enforce
Start/End Equality
Enable Transmit
Check Digit
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Enable Codabar
Start/End Character
Type - ABCD/TN*E
Programming “ON”
Programming “OFF”
Enable Enforce
Start/End Equality
Programming “ON”
Programming “OFF”
Set Max Length
(00-99) Default=99
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Set Min Length
(00-99) Default=01
Scan 2 digits from
Section C.A1
Scan 2 digits from
Section C.A1