UnionNet SP2100 - APPENDIX J - SP2100 System Menu; Firmware Factory Default Settings

72
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
System Menu Option Sub Menu Option
SP2100 Default
Value
Information
S/N,M/D,H/W,F/W,BOOTLOAD,MEMORY None N/A
Settings
Power Auto Off 1min – 10min 5 mins
LCD Auto Off 1sec – 60sec 10 mins
Backlight 10%-100% 60%
RealTime Clock
yyyy/mm/dd
hh:mm
Current (EST)
Pre/Suffix Set Setup Pre/Suffix
Prefix: NULL
Suffix CR (OD)
Language English/Korean Eaglish
Buzzer Variable Volume: 3 | 2 | 1 | OFF 3
Vibrator Enable / Disable Enable
Default Config. Yes/No NO
Bluetooth
Information BT Config Info N/A
BT Profiles
MUX / HID / SPP
MUX
Mfi for iOS
HID Batch Enable N/A
Mfi Mode Enable / Disable Enable
Auto Reconnect Enable / Disable Enable
Disconnect Enable N/A
HID DateAdd Enable / Disable Disable
Trans Language Eng-Fr-Dan-Swe English
HID Select Normal / Special Normal
HID Char Delay
msecs:10,20
50,100,200,500
None (no delay)
HID String Int
msecs: 10,20
50,100,200,500 Seconds:1, 2, 5
200 msecs
Scan Engine
Information None N/A
Engine Setup SE340, EM1500, EM3000V2 N/A
Continue Mode Auto / Manual Manual
Duplicate Data Enable / Disable Enable
Memory
Data Save SR / SN / PR SR
Memory Info Shows Memory Used N/A
Delete Memory Yes / No N/A
Battery
Power View Percent Remaining N/A
Service
Who to Call BarcodeGuy.com (800) 880-7495
APPENDIX J - SP2100 System Menu / Firmware Factory Default Settings