UnionNet SP2100 - Interleaved 2 0 F 5 (Code ID: I); Industrial 2 0 F 5 (Code ID: H)

APPENDIX C - SP2100 1D LASER Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
1D LASER ONLY
54
Programming “OFF” Programming “OFF”
C.9 - Interleaved 2 0f 5 (Code ID: I)
Programming “ON”
Programming “OFF”
Enable Interleaved
2 of 5
Programming “ON”
Programming “OFF”
Disable Interleaved
2 of 5
Programming “ON”
Enable Check
Digit (USS)
Programming “ON”
Disable Check
Digit (USS)
Set Max Length
(00-99) Default=99
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Set Min Length
(00-99) Default=01
Scan 2 digits from
Section C.A1
Scan 2 digits from
Section C.A1
Programming “OFF” Programming “OFF”
Programming “ON”
Enable Check
Digit (OPCC)
Programming “ON”
Disable Check
Digit (OPCC)
Programming “OFF” Programming “OFF”
Programming “ON” Programming “ON”
Enable Transmit
Check Digit
Disable Transmit
Check Digit
C.10 - Industrial 2 0f 5 (Code ID: H)
Programming “ON”
Programming “OFF”
Enable Industrial
2 of 5
Programming “ON”
Programming “OFF”
Disable Industrial
2 of 5
Set Max Length
(00-99) Default=99
Programming “ON”
Programming “OFF”
Programming “ON”
Programming “OFF”
Set Min Length
(00-99) Default=01
Scan 2 digits from
Section C.A1
Scan 2 digits from
Section C.A1