Unitech MS282 - CLSI Editing; NOTIS Editing

-88- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.9.2 CLSI Editing
Scan Enable CLSI Editing to strip the start and stop characters and insert a
space after the first, fifth, and tenth characters of a 14-character Codabar
symbol if the host system requires this data format.
NOTE: Symbol length does not include start and stop characters.
3.9.3 NOTIS Editing
Scan Enable NOTIS Editing to strip the start and stop characters from a
decoded Codabar symbol if the host system requires this data format.
Enable CLSI Editing
Disable CLSI Editing*
Enable NOTIS Editing
Disable NOTIS Editing*