Unitech MS282 - Matrix 2 of 5 Check Digit

-97- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.12.2 Matrix 2 of 5 Check Digit
The check digit is the last character of the symbol used to verify the
integrity of the data. Scan one of the following bar codes to determine
whether to include the Matrix 2 of 5 check digit with the bar code data.
Matrix 2 of 5 - One Discrete Length*
(Default: 14)
Matrix 2 of 5 - Two Discrete Lengths
Matrix 2 of 5 - Length Within Range
Matrix 2 of 5 - Any Length
Enable Matrix 2 of 5 Check Digit
Disable Matrix 2 of 5 Check Digit*