Unitech MS282 - I 2 of 5 Check Digit Verification; Transmit I 2 of 5 Check Digit

-79- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.7.2 I 2 of 5 Check Digit Verification
Scan one of the following bar codes to check the integrity of all I 2 of 5
symbols to verify the data complies with either the specified Uniform
Symbology Specification (USS), or the Optical Product Code Council
(OPCC) check digit algorithm.
3.7.3 Transmit I 2 of 5 Check Digit
Scan one of the following bar codes to transmit I 2 of 5 data with or without
the check digit.
Disable*
USS Check Digit
OPCC Check Digit
Transmit I 2 of 5 Check Digit (Enable)
Do Not Transmit I 2 of 5 Check Digit (Disable)*