Unitech MS282 - Aztec; Aztec Inverse

-119- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.17.9 Aztec
Scan one of the following bar codes to enable or disable Aztec.
Note: Enabling this also enables Linked Aztec.
3.17.10 Aztec Inverse
Scan one of the following bar codes to select the Aztec inverse decoder
setting:
•Regular Only - The engine decodes regular Aztec bar codes only.
•Inverse Only - The engine decodes inverse Aztec bar codes only.
•Inverse Autodetect - The engine decodes both regular and inverse Aztec
bar codes.
Enable Aztec *
Disable Aztec
Regular Only
Inverse Only
Inverse Autodetect *