-23- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
2.8 Mirrored Image
Scan Enable Mirrored Images to scan images in reverse, or mirrored, as
if seen through a mirror. This mode is useful in applications requiring
scanning through a mirror and using symbologies that do not decode in
reverse. Enabling this mode when using snapshot, video, or video
viewfinder mode transmits images as mirrored images.
Disable Mirrored Image*
Enable Mirrored Image
To Next Page
Loading...
Need help?
General
