Unitech MS282 - Code 39 Check Digit Verification

-64- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.4.6 Set Lengths for Code 39
3.4.7 Code 39 Check Digit Verification
Scan Enable Code 39 Check Digit to check the integrity of all Code 39
symbols to verify that the data complies with specified check digit
algorithm. Only Code 39 symbols which include a modulo 43 check digit
are decoded. Enable this feature if the Code 39 symbols contain a Modulo
43 check digit.
Code 39 - One Discrete Length
Code 39 - Two Discrete Lengths
Code 39 - Length Within Range(Default: 2 to 55) *
Code 39 - Any Length
Enable Code 39 Check Digit
Disable Code 39 Check Digit *