Unitech MS282 - Security Level

- 108 - © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.15.2 Security Level
The engine offers four levels of decode security for delta bar codes, which
include the Code 128 family, UPC/EAN/JAN, and Code 93. Select
increasing levels of security for decreasing levels of bar code quality. There
is an inverse relationship between security and engine aggressiveness, so
choose only that level of security necessary for the application.
•Security Level 0 - The engine operates in its most aggressive state, while
providing sufficient security decoding most in-spec bar
codes.
•Security Level 1 - This default setting eliminates most misdecodes.
•Security Level 2 - Select this option if Security Level 1 fails to eliminate
misdecodes
•Security Level 3 - If you selected Security Level 2 and misdecodes still
occur, select this security level.
Note: Selecting this option is an extreme measure against mis-decoding severely
out-of-spec bar codes, and significantly impairs the decoding ability of the engine.
If this level of security is required, try to improve the quality of the bar codes.
Security Level 0
Security Level 1*
Security Level 2
Security Level 3