Unitech MS282 - Composite TLC-39; Composite Inverse

-112- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.16.3 Composite TLC-39
Scan one of the following bar codes to enable or disable Composite bar
codes of type TLC-39.
3.16.4 Composite Inverse
Select an option to set Composite for either regular decode or inverse
decode.
• Regular Only - The engine decodes regular Composite bar codes only.
Before selecting this, set Inverse 1D to Regular Only or
Inverse Autodetect.
• Inverse Only - The engine decodes inverse Composite bar codes only.
This mode only supports Composite Inverse that includes
DataBar combined with CCAB, and does not support
other 1D/2D combinations. Before selecting this, first
enable Composite CC-A/B , and set Inverse 1D to Inverse
Only or Inverse Autodetect.
Enable TLC39
Disable TLC39*
Regular Only*
Inverse Only