Unitech MS282 - Picklist Mode

-21- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
2.5 Picklist Mode
Scan one of the following bar codes to select a Picklist Mode, which allows
you to pick and decode a bar code from multiple bar codes printed close
together.
NOTE: Enabling Picklist Mode overrides the Disable Decode Aiming Pattern options. You can
not disable the decode aiming pattern when Picklist Mode is enabled.
•Enable Picklist Mode Always - Picklist Mode is always enabled.
•Disable Picklist Mode Always - Picklist Mode is always disabled.
Enable Picklist Mode Always
Disable Picklist Mode Always*