Unitech MS282 - Australia Post

- 125 - © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS282 User’s Manual
3.18.9 Australia Post
Scan one of the following bar codes to enable or disable Australia Post.
3.18.10 Australia Post Format
Scan one of the following bar codes to select a format for Australia Post:
Autodiscriminate (or Smart mode) - Decode the Customer Information
Field using the N and C Encoding
Tables.
NOTE : This option increases the risk of misdecodes because the encoded data format
does not specify the Encoding Table used for encoding.
Enable Australia Post
Disable Australia Post*