Ceilometer CT25K
CT25K-U059en-2.1 User’s Guide
121
Figure 8-9 Internal heater replacement
8.9.4 Battery 4592 replacement instructions
1. Open the screw from the battery switch subassembly front panel shown in
Figure 8-10 and remove the panel.
2. Pull the battery out by the plastic stripe attached around the battery. Do
not pull by the battery switch connector wires.
3. Detach the red and black wires from the battery and move them to the new
battery. Transfer the plastic pull-out stripe to the new battery.
4. Put the battery back in its original position and close the front panel with
the attachment screw.
To Next Page
Loading...
