Ceilometer CT25K
CT25K-U059en-2.1 User’s Guide
27
4.3 User Commands
User commands, command hierarchy and description are described in table 4-
1 below. User commands are accessible after opening the line by command
OPEN (no password needed).
The command line interpreter provides interactive help support, so that the
exact format of commands doesn’t have to be remembered. At each level of
the menu, keying ENTER first provides an output of the menu available, the
second ENTER provides an eventual HELP text. Keying in a letter followed
by ENTER outputs all commands with the same first letter; keying in two
letters followed by ENTER outputs all commands with the same first two
letters, etc.; when only the one desired command is left, then it is executed
when ENTERed. This way one needs to know only approximately what one
wants to do, and the system provides the necessary aid.
In addition to the user’s menu and command set there is a second in-depth
maintenance and service level menu and command set, which is intended for
more profound system changes and diagnostics. Password for this level is
"advanced". Commands on this level should be used only according to
instructions described in this manual.
To Next Page
Loading...
