1 DMT143 settings are available through the settings wheel in the Insight Devices view.
DMT143 transmitters support Insight from transmitter software version 1.4.4
onwards.
Download Insight software at www.vaisala.com/insight.
5.2.1 Connecting to Insight Software
• Computer with Vaisala Insight software installed
• USB connection cable (order code 219690)
Before connecting the transmitter to a PC, disconnect the cables from both the
analog and digital ports of the transmitter.
1. Open the Insight software.
2. Connect the USB cable to a free USB port on the PC.
3. Connect the USB cable to the digital port of the transmitter.
4. Wait for Insight software to detect the transmitter.
If the transmitter is not detected, disconnect and reconnect the Vaisala USB cable to the
digital port connector of the transmitter.
Chapter 5 – Operation
37
To Next Page
Loading...
