6. You may need to adjust the Local echo setting in the Terminal category to see what you
are typing on the serial line. To access the configuration screen while a session is running,
click the right mouse button over the session window, and select Change Settings... from
the pop-up menu.
7.3 Accessing Serial Interface in Devices with
Modbus Output
Follow the steps below to connect to the serial line with a transmitter with Modbus output. You
can also use the procedure to retrieve the communication settings of your device, if you do not
know them. You must use the Vaisala USB cable (Vaisala order code 219690) for the
connection.
• Computer with
• Windows operating system
• Terminal application
• Free USB port
• Driver for Vaisala USB cable installed
• Vaisala USB cable for computer connection (219690)
1. Connect the USB cable to the PC and install the driver, if necessary. Do not connect the
cable to the transmitter yet.
DMT143 User Guide M211435EN-J
42
To Next Page
Loading...
