Vaisala DRYCAP DMT143 - Select Unit; View User Adjustment Parameters; Table 12 Pressure Conversion Coefficients

The pressure conversion coecients from other pressure units to bars is given in the table
below.
Table 12 Pressure Conversion Coecients
From To bar
a
PaN/m
²
0.00001
mmHg torr 0.001333224
inHg 0.03386388
mmH
2
O 0.00009806650
inH
2
O 0.002490889
atm 1.01325
at 0.980665
psi
a
0.06894757
For example: 29.9213 inHg = 29.9213 × 0.03386388 = 1.01325 bar
a.
7.8.4 Select Unit
Use the UNIT command to select metric or non-metric output units.
UNIT [x]<cr>
Syntax
Description
x
Selects the unit type to output:
m = metric units, for example, Celsius
n = nonmetric units, for example, Fahrenheit
Example:
unit m
Units : Metric
7.8.5 View User Adjustment Parameters
Use the L command to view the current user adjustment parameters that are aected by the
LI command and the MI70 indicator (Tdf oset only). This command is useful for checking the
currently applied correction.
L<cr>
The output values are as follows:
Chapter 7 – Serial Communication
55