You can configure the following BACnet settings with Vaisala PC Insight software:
• Max_Master (highest address polled for MS/TP master)
• Device object identifier (BACnet ID of the device)
• Device object name (max. 40-character name for the device)
• Device location (max. 40-character location info for the device)
• Firmware revision (read-only version information)
• Remote management password (max. 20-character password for remote management,
default 1234)
To configure BACnet settings with Insight:
1. Connect to Insight and select > Configure Device > BACnet.
2. Enter the values for BACnet settings as necessary: see the instructions in the Insight
interface for allowed ranges and additional information.
3. Select Save to store the settings.
Chapter 5 – Modbus and BACnet Communication
29
To Next Page
Loading...
