8. Maintenance
8.1 Cleaning
You can clean the transmitter and probe body by wiping with a moist cloth. Standard cleaning
agents can be used.
Note that the transmitter body is powder coated. Do not use
cleaning chemicals that can damage the coating.
CAUTION!
When cleaning, follow these precautions:
• Do not immerse the transmitter or probe in liquid to clean it.
• Take care not to damage the PTFE membrane inside the metal grid filter (ASM212652SP)
when cleaning. Do not use a pressure washer to clean the filter, and avoid pulling, tearing
or puncturing the membrane.
• When changing the filter, you can use clean instrument air to gently blow any loose dirt
and filter material from the sensor. Do not attempt to clean the optical surfaces in any
other manner.
Chapter 8 – Maintenance
43
To Next Page
Loading...
