To open menus, press an arrow button and then press the shortcut buttons. To activate a
function shown above the shortcut button, press the shortcut button. To navigate in the
menus, press arrow buttons.
6.2 Connecting HMD60 to MI70 Indicator
• MI70 connection cable (Vaisala order code 219980SP).
• Medium size crosshead screwdriver for opening the lid screws.
Figure 23 Connecting HMD60 to MI70 Indicator with Cable 219980SP
1. Open the 2 captive screws on the transmitter body and remove the lid.
2. If the MI70 indicator is on, turn it o.
3. Connect the MI70 connection cable 219980SP to HMD60 service port and either of the
MI70 connector ports.
4. Turn on the MI70 indicator (time and date are requested at first startup). MI70 detects
HMD60 and proceeds to show the measurement screen. MI70 will start to show valid
measurement results from HMD60 after a few seconds.
Chapter 6 – Operating with MI70 Indicator
31
To Next Page
Loading...
