Property Specification
Default analog output scale -20 … +80 °C (-4 … +176 °F)
Accuracy at +20 °C (+68 °F) ±0.1 °C (0.18 °F)
Temperature dependence ±0.005 °C/°C
Factory calibration uncertainty ±0.1 °C (0.18 °F)
Response time (T63) with free convection 8 min
Table 7 Analog Output Performance
Property Specification
Accuracy at +20 °C (68 °F) ±5 mV
Temperature dependence ±0.2 mV/°C
Table 8 Operating Environment
Property Specification
Operating temperature, electronics -40 ... +60 °C (-40 ... +140 °F)
Operating temperature, probe -40 ... +80 °C (-40 ... +176 °F)
Storage temperature range -40 ... +80 °C (-40 ... +176 °F)
Maximum flow speed 50 m/s with sintered filter
Electromagnetic compatibility EN61326-1, Industrial Environment
Table 9 Inputs and Outputs
Property Specification
Power supply input 15 … 35 VDC
16 … 24 VAC
Power consumption 1.0 W (typical, for both AC and DC)
Analog output 1 × RH output 0 … 10 V, 1 × T output 0 … 10 V 1
(load resistance: 10 kΩ min.)
Digital output (RS-485) Isolated, supports Modbus RTU and BACnet
MS/TP protocols
BACnet MS/TP Address range: 0 … 127 (master mode only)
Modbus RTU Address range: 1 … 247
Chapter 9 – Technical Data
45
To Next Page
Loading...
