MC095 - MCP-8 Control Unit Section 4 - Programming
43
Diagnostic Screen
Selecting the Diagnostic Button opens the Diagnostic Screen.
The top screen section displays the software version information, while the bottom section displays the valve status.
The top numbers show the valve type. The bottom numbers will switch back and forth from showing the valve voltage
to showing the valve status (enabled or disabled).
A voltage reading of 0.0 could indicate a blown fuse. See the Parts
List section for fuse numbers and placement.
Scrolling down, The “Scanner” display indicates the number of encoder pulses that occurred while the scanner was
blocked. This is a useful reference for determining the encoder ratio accurately (number of pulses compared to
product length)
To Next Page
Loading...
Need help?
General