MC095 - MCP-8 Control Unit Section 1 - Introduction
9
Section 1 - Introduction
System Description
This manual has been prepared by Valco Cincinnati, Inc. to provide assistance in the installation, operation, and
servicing of your MCP-8 Control Unit.
The MCP-8 Control Unit from Valco provides operators with a full-featured affordable solution to adhesive system
pattern control. The control features 4-channel operation, multiple glue patterns, and an optional flow control
capability. The unit allows program changes and adjustments, so you can get desired results immediately. The control
has a compact design and features “plug-and-run” connectors for easy installation and quick start up.
Features/Capabilities
The MCP-8 Control Unit works with a variety of Valco’s cold-glue or hot melt adhesive dispensing valves.
Features/Capabilities of the MCP-8 Unit include:
Suited to high-speed converting, such as:
-folding carton production
-envelope manufacturing
-paper-folders
-book and magazine production
-bag-making
-corrugated box making
Dual-encoder-based or timer mode
Multi-valve, complex glue pattern capabilities
“Continuous,” “Stitch” pattern and “Jogg” gluing
Adjustable minimum speed
Inch or metric calibration
CE compliant
Password protection for key system parameters
Integral fluid-flow control option (EPC) and external EPC output
Web break detection option
Batch count/production count
Job Storage Memory: Up to 1000 jobs
Programmable valve output voltages depending upon base unit
Jam Preventer w/Alarm and relay output
All hardware must be up-to-date for all new functions to work. Please
see the Parts List for a compatibility chart.
To Next Page
Loading...
Need help?
General