Description Decal
Overturn
Risk that the machine can overturn. Keep the ROPS
locked in vertical position.
Do not stay on the implement
To prevent injury, do not stay on the implement (or
between the implement and the machine) when
you use the external (remote) controls.
Lubrication
Lubricate the machine. Refer to the maintenance
schedule in the Operator's Manual for more data.
Without cab
Maintenance of the safety decals
• Make sure that the decal is in the correct position on the machine.
• Keep the safety decals clean. Clean the safety decals with soap and water. Do not use strong or
abrasive materials or chemicals that can cause damage to the safety decals.
• Replace the safety decals that are missing or that are in a bad condition.
• Buy the replacement safety decals from an approved dealer.
How to install the safety decals
1. Make sure that the installation surface is clean and dry.
2. Safety
50 F Series
39940211 (555124)
To Next Page
Loading...
