Valtra F Series

2. Make sure that the temperature of the installation surface is not less than 5 °C (41 °F).
3. Find the correct position for the decal before you remove the cover paper.
4. Remove a small part of the cover paper.
5. Put the decal in the correct position on the installation surface. Carefully push the small part of the
adhesive surface of the decal on to the installation surface.
6. Slowly remove the cover paper and attach the decal to the installation surface.
7. Make small air holes in the decal with a pin. Use the cover paper to make sure that the decal is flat.
2. Safety
F Series 51
39940211 (555124)