With the engine on, press the button (2), until the
message "SET POINT" shows on the digital display.
Use the hand throttle lever (A), or the throttle
pedal (B), to set the engine speed.
Press the button (2), for a minimum of 3 seconds,
to set the adjustment.
GUID-1BAB8F8A-E007-4C08-8DC2-3B36091BF40F-high.jpg [High]
Fig. 51 Without cab
GUID-8D365DFD-CB88-48BC-8C8E-A0651F3E0BDC-high.jpg [High]
Fig. 52 Without cab
The message "CRUISE ON" illuminates on the
digital display, to show that the cruise control is on.
If you release the hand throttle lever (A), or the
throttle pedal (B), the engine speed stays at the
stored value.
GUID-F5946457-1F02-4E19-868C-9EF73D290BB4-high.jpg [High]
Fig. 53
3. Operation
F Series 77
39940211 (555124)
To Next Page
Loading...
Need help?
General
