Valtra F Series User Manual

Press the buttons (1), and (2), to correct the engine
speed in steps of 25 rpm. Use the button (1), to
increase the speed, or button (2), to decrease the
speed.
The cruise control then sets the new engine speed
as the set speed.
GUID-9C2E0072-D079-4FFA-83AF-A93D25A1ABD8-high.jpg [High]
Fig. 54 With cab
Press the buttons (3), and (4), to correct the engine
speed in steps of 25 rpm. Use the button (4), to
increase the speed, or button (3), to decrease the
speed.
The cruise control then sets the new engine speed
as the set speed.
GUID-D9572EB8-1366-4382-B5CC-94886D6E822D-high.jpg [High]
Fig. 55 Without cab
Switch o the cruise control
To switch o the cruise control, press the button
(3), for a maximum of 3 seconds. The message
"CRUISE OFF" illuminates on the digital display.
NOTE:
If you use 1, or 2 brake pedals, at a speed of 14
km/h or higher, the cruise control goes o. When
you stop the engine, the parameters for cruise
control erase.
GUID-1FF291A0-B26B-432F-9D77-A6F0A4BFDF97-high.jpg [High]
Fig. 56 With cab
3. Operation
78 F Series
39940211 (555124)

Valtra F Series Specifications

General

Brand	Valtra
Model	F Series
Category	Tractor
Language	English