VAMP 265 - 12. Order Information

Technical description
12 Order information
VM265.EN011
VAMP 24h support phone +358 (0)20 753 3264
215
12. Order information
When ordering, please, state the ordering code:
VAMP 265 ORDERING CODE
VAMP 265
-
VAMP 265
Nominal current, HV & LV side [A]
1 =
1A & 1A
3 =
1A & 5A
4 =
5A & 1A
5 =
5A & 5A
Nominal earth-fault currents Io & I'o [A]
A = 5A & 5A
B = 5A & 1A
C = 1A & 5A
D = 1A & 1A
Frequency [Hz]
7 = Standard relay
Supply voltage [V]
A = 40.. 265Vac/dc
B = 18.. 36Vdc
C = 40.. 265Vac/dc + ARC Protection
D = 18.. 36Vdc + ARC Protection
E = 40.. 265Vac/dc + DI19, DI20 + arc channel, Optional
F = 18.. 36Vdc + DI19, DI20 + arc channel, Optional
Optional hardware
A = None
B = Plastic/Plastic serial fibre interface
C = Profibus interface
D = RS 485 interface (4-wire)
E = Glass/Glass serial fibre interface
F =
Rx Plastic/Tx Glass serial fibre interface
G =
Rx Glass/Tx Plastic serial fibre interface
H = RJ-45 10Mbps ethernet interface
M = RJ-45 10Mbps ethernet inc. IEC 61850
O = LC 100 Mbps ethernet fibre interface inc. IEC 61850
P = RJ-45 100Mbps ethernet interface inc. IEC 61850
R = 2 x LC 100 Mbps ethernet fibre interface inc. IEC 61850
S = 2 x RJ-45 100 Mbps ethernet interface inc. IEC 61850
Optional software
A = Version 2 firmware (#
C = Version 6 firmware (*
E = Standard firmware
M = Standard firmware, Motor functions
Note:
(* Optional hardw are, A-H available
(# Optional hardw are, A-G available
Accessories :
Order Code Explanation Note
VEA3CGi External ethernet interface module
VPA3CG Profibus interface module
VSE001 Fiber optic Interface Module
VSE002 RS485 Interface Module
VSE003 RS485 Interface Module, Ext I/O interface
VSE009 External DeviceNet interface module
VIO 12 AB RTD Module, 12pcs RTD inputs, RS 485 Communication (24-230 Vac/dc)
VIO 12 AC RTD/mA Module, 12pcs RTD inputs, PTC, mA inputs/outputs,
RS232, RS485 and Optical Tx/Rx Communication (24 Vdc)
VIO 12 AD RTD/mA Module, 12pcs RTD inputs, PTC, mA inputs/outputs,
RS232, RS485 and Optical Tx/Rx Communication (48-230 Vac/dc)
VX003-3 RS232 programming cable (Vampset, VEA 3CGi) Cable length 3m
VX004-M3 TTL/RS232 converter cable (PLC, VEA 3CGi) Cable length 3m
VX007-F3 TTL/RS232 converter cable (VPA 3CG) Cable length 3m
VA 1 DA-6 Arc Sensor Cable length 6m
VAM 16D External LED module Disables rear local communication
VYX076 Raising Frame for 200-serie Height 40mm
VYX077 Raising Frame for 200-serie Height 60mm
VYX233 Raising Frame for 200-serie Height 100mm
V200WAF V200 wall aseembly frame
(For OLD porjects)
(See Firmware revision history)