VAMP 24h support phone +358 (0)20 753 3264
will be overwritten, when a new event does occur. The shown
resolution of a time stamp is one millisecond, but the actual
resolution depends of the particular function creating the
event. For example most protection stages create events with
10 ms or 20 ms resolution. The absolute accuracy of all time
stamps depends on the time synchronizing of the relay. See
chapter 3.5 for system clock synchronizing.
Event buffer overflow
The normal procedure is to poll events from the device all the
time. If this is not done, the event buffer will eventually
overflow. On the local screen this is indicated with string
"OVF" after the event code.
Setting parameters for events
Order of the event buffer for local
display
Scaling of event fault value
Per unit scaling
Primary scaling
Alarm pop-up display is enabled
No alarm display
FORMAT OF EVENTS ON THE LOCAL DISPLAY
CH = event channel, NN=event code
Event channel and code in plain text
Date (for available date formats see chapter 3.5)
To Next Page
Loading...
