Varta element Series - Technical Parameters; Table 5: Technical Parameters - Expansion Stage Element 3; Table 6: Technical Parameters - Expansion Stage Element 6

Subject to modification! Updated 10/2017
31
General
Operation
Installation
Operation (Service)
Maintenance
3.6 Technical parameters
EXPANSION STAGE ELEMENT 3
 Nominal capacity
 AC charge power
 AC discharge power
 Battery inverter structure
 Dimensions in mm (W x H x D)
 Weight (incl. battery module)
 Installation location
 Grid connection
 Make current
 Maximum output residual current
 Internal consumption
optimisation
 Power measurement
 System transport
 Packaging in mm (W x H x D)
 Grid system fusing
3.3 kWh
1.8 kW
1.6 kW
without isolation transformer
600 x 1,176 x 500
95 kg
inside the building
400 V AC, 3-phase, 50 Hz
< max. operating current
for input and output
max. 6 A for 100 μs
3-phase, regulated
3-phase, via current sensor
vertical on a pallet
700 x 1,325 x 600
16 A (B-character)
Table 5: Technical parameters – expansion stage element 3
EXPANSION STAGE ELEMENT 6
 Nominal capacity
 AC charge power
 AC discharge power
 Battery inverter structure
 Dimensions in mm (W x H x D)
 Weight (incl. battery modules)
 Installation location
 Grid connection
 Make current
 Maximum output residual current
 Internal consumption
optimisation
 Power measurement
 System transport
 Packaging in mm (W x H x D)
 Grid system fusing
6.5 kWh
2.2 kW
1.8 kW
without isolation transformer
600 x 1,176 x 500
115 kg
inside the building
400 V AC, 3-phase, 50 Hz
< max. operating current
for input and output
max. 6 A for 100 μs
3-phase, regulated
3-phase, via current sensor
vertical on a pallet
700 x 1,325 x 600
16 A (B-character)
Table 6: Technical parameters – expansion stage element 6