Varta element Series - Air Filter Change: Resetting the Time; Checking the Fan

Subject to modification! Updated 10/2017
131
General
Operation
Installation
Operation (Service)
Maintenance
The software update can be carried out by using the VARTA network
configurator (NCT). This is available for download in the B2B area of
the page https://www.varta-storage.com after entering the username
and the personal password.
i
Before you carry out a software update, please
check whether any errors are displayed on the
web interface. If yes, rectify them first and
restart. After this, the system is ready for a
software update.
11.2.5 Air filter change: Resetting the time
The air filter must be replaced at every second service. See Chapter
11.4.5.
 From the Settings tab, select the Service settings item.
 Check the Reset air filter box.
 Click on Apply.
11.2.6 Checking the fan
 From the Settings tab, select the Service settings item.
 Use Manual fan control to toggle between settings 0
(= automatic), 1 (= medium setting) and 2 (= highest setting).