Subject to modification! Updated 10/2017
Changes to the factory settings require a
network connection.
Position the cabinet at the installation location.
Screw your storage cabinet to the rear wall using
appropriate fasteners. To do so, turn the mounting bracket
outwards by 90°.
Figure 17: Wall mounting VARTA element
Set the height-adjustable feet (see Figure 21: Installation
positions of the battery modules) to a height of approx.
4 cm (max. 5 cm).
Align the storage cabinet using a spirit level. You can
make fine adjustments with the height-adjustable feet.
To Next Page
Loading...
