18
Electronic Program Guide (EPG)
EPG TV Guide (for DTV mode only)
EPG stands for Electronic Program Guide. It is supplied by the program
providers and offers information about the programs to be broadcast. You can
access it in digital mode by pressing the EPG button on the remote control.
• Press the EPG button to display the EPG interface (above). The area at the
top will display information about the selected program or channel, and the
columns below will display the list of available channels and their programs
at various time slots.
• Before you can view any EPG information, you have to ‘activate’ each
channel for which you want to view program information. To do this, press
the / buttons to select a channel in the left column, then press OK to
confirm.
• Press the / buttons to switch between channels and program columns.
• Press the / buttons to select a different channel/program in the list and
press OK to activate the channel.
• Select the programs column and press the BLUE button to view the TV
guide for the next day.
• Select the programs column and press the YELLOW button to view the
TV guide for the previous day.
• Press the GREEN button to schedule a reminder for the selected
program.
• Press the RED button to view the listing of scheduled recordings.
• Press the RECORD button to schedule the program for recording.
• Press the INFO button to display full program information.
• Press EXIT to exit the EPG menu.
To Next Page
Loading...
