V-Touch AFAD
MAN-13
User’s Manual
14 Version 2.1
Figure 3-8 Assigning the AFAD unit to the Raise Gate #2 button on the remote control
5 In the message box that opens, tap Yes.
By doing that, you tell both remote controls that this AFAD is now unit number two and
identified by the button on the wireless remote control.
The number-one spot, “primary”, becomes available. The screen displays the address of the
unit that can be found by the other V-touch controller.
Figure 3-9 Identification of the other unit available to be paired with the remote
6 Walk over to the Flagger-Mac that you want to identify as the button on the remote
control and, on the V-Touch, tap and tap .
To Next Page
Loading...
Need help?
General
