User’s Manual 3 Version 2.1
V-Touch AFAD
MAN-13
Before using the V-Touch AFAD, the Ver-Mac units must be installed on the job site. Refer to the
Operation, Safety and Maintenance Manual of your units by scanning the corresponding QR code
sticker.
2.1 Starting the V-Touch AFAD
The V-Touch offers two access levels:
Viewer: (no password)
Can access the Home screen only.
Can check the status of all the V-Touch AFAD.
Administrator:
Has a password-protected account with complete access to all functions.
Figure 2-1 Selection of the security level
2 Connection to the V-Touch AFAD
For Flagger-Macs with the Radio option, during deployment, the wireless remote is
not operational. It is, however, possible to lower and raise the gate using the buttons
in the V-Touch interface.
When the gate is in place, Ver-Mac recommends raising it until you are ready to start
signaling operation.
To Next Page
Loading...
Need help?
General
