V-Touch AFAD
MAN-13
User’s Manual
42 Version 2.1
7.2.1 Devices
If you replace an important component or if one is defective, you can see it in the list of components
of your Flagger-Mac.
Figure 7-4 Devices screen
7.2.2 Wireless Remote
If you need to pair a wireless remote, access this screen and tap Add (scan) to find a wireless
remote.
Figure 7-5 Screen to add a wireless remote
Then press any button on your wireless remote. The wireless remote identifier will appear in the list.
Tap Save.
To use the Duo mode, you must pair the wireless remote that will be used with both Flagger-Macs.
In Solo mode, each Flagger-Mac has its own wireless remote.
Once paired, you can verify the proper functioning of the wireless remote by pushing any button and
its serial number (1 or 2) will be displayed in green during a few seconds.
To Next Page
Loading...
Need help?
General
