V-Touch AFAD
MAN-13
User’s Manual
46 Version 2.1
7.4.1 Change Admin Password
Following a successful first login, Admin users can select Change password as needed.
To change the password:
1 Enter the old password using the numeric keypad and confirm.
2 When prompted, enter your new password, and confirm.
A message confirms your new password. You will be redirected to the Parameters screen where you
can proceed to access other operations or log out.
Figure 7-9 Changing Admin password
7.4.2 System Clock
This function is only available to Administrators.
The Clock Configuration screen lets you configure the system clock Manually.
Figure 7-10 Clock configuration for a manual configuration
To Next Page
Loading...
