V-Touch AFAD
MAN-13
User’s Manual
13 Version 2.1
3.4 Pairing the AFAD Units
To operate two automated flagger assistance devices with one wireless remote, you must define one
of the units as secondary since all of them are primary by default. This operation only has to be
performed once. Once paired, the units remain paired, even when they are tuned off.
You pair the AFAD units from the V-Touch AFAD touchscreen controller, on the Options screen. The
V-Touch is operated from the controller box of the Flagger-Mac Lite unit or in the storage box of the
AFAD unit.
To pair two AFAD units:
1 On the menu bar on the left, tap .
2 On the Options screen, tap .
3 At the bottom of the Units pairing screen, tap Edit.
Figure 3-7 Units Pairing sreen
4 In the screen showing the list of units found, tap Secondary.
To Next Page
Loading...
Need help?
General
