V-Touch AFAD
MAN-13
User’s Manual
44 Version 2.1
7.3 Edit Configuration
You can use the Flagger-Mac in duo or solo mode.
Figure 7-7 Edit Configuration screen
Yellow Time
The Yellow time is the number of seconds the lamp stays yellow before switching to the red
lamp when you push the button to close the gate.
Gate delay
The time needed to lower the gate after the start of the red phase.
Unit number
In Duo mode, your must identify your units as #1 and #2. The AFAD identified as #1 will react
when you press the button of the associated wireless remote and #2 it will react to the
button.
Edit Configuration:
1 The screen displays timing options and unit selection.
2 Verify if the times are satisfactory.
3 In the number of units, choose if you are controlling one or two Flagger-Macs with the wireless remote.
In Solo mode, select unit number 1 for each Flagger-Mac. Pair the local wireless remote.
In Duo mode, select one of the Flagger-Macs as unit #1 and the other one as unit #2. Pair the same wireless
remote with both units.
To Next Page
Loading...
Need help?
General
