VERITAS NetBackup 5230 Hardware Installation Guide

To install the RAID controller card
1
Put on an ESD wrist strap or take other ESD precautions.
2
Locate PCIe riser assembly R2 and slot 1. Riser 2 is located next to the power
supply.
3
Remove the PCIe riser assembly as follows.
■ Disengage the two hooks (1) from the chassis slots (2) that secure the riser
2 assembly to the chassis.
94Adding 2U12 storage shelves to an operational NetBackup 5230 Appliance
Installing the external RAID controller card

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)