Vertical Edge 5000 - Page 144

Configuration Parameters D-16
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
PROG add -
prog Specifies the flexible button number being assigned.
Valid values are
•
IP5000 — 2 to 24 or 2 to 36 w/ DSS
The default is blank.
func Specifies the function for flexible buttons not assigned as a line.
Valid values are:
•
1 — Speed Dial
• 2 — Phonebook
• 3 — Call Log
• 4 — Mute
• 5 — Headset
• 6 — Last number redial
• 7 — Last call return
• 8 — Forward
• 9 — Conference
• 10 — Transfer
• 11 — Hold
• 12 — DND
• 13 — Ringer Off
• 14 — Message
The default is blank.
num Specifies the number for a Speed dial or Message button.
The default is blank.
label -
prog Specifies the flexible button number being assigned.
Valid values are
•
IP5000 — 1 to 24 or 1 to 36 (w/ DSS)
The default is blank.
string Specifies the label for flexible buttons.
The maximum length is 15-characters, 12 display on IP8840, 10
display on IP8812LSS.
The default is blank.
CALL callnum_in_line Defines the number of active calls on a line.
Valid value is 1-3.
The default value is 3.
Section Field Name Description
Release 1.0
September 2010