Configuration Parameters D-19
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
SYSTEM function onetouch_pickup Enables call answer or resume from hold by pressing line button.
With the parameter disabled, pressing the line button displays
the line status.
Valid values are enable or disable.
The default is enable.
function download_flag Enables display of Config and S/W download flag under LCD
Menu Phone Settings
Valid values are disable or enable.
Default is disable.
phone_password Assigns password for LCD Configuration Menu and Phone
Unlock.
Valid value is 4 to 8 digits string.
Default is blank.
PROVISION type Defines the protocol of the provisioning server
Valid values are 0 for TFTP or 1 for HTTPS
Default is 0 (TFTP).
cfg_download Enables download of configuration file from the provisioning
server.
Valid values are enable or disable.
Default is enable.
sw_download Enables download of firmware from the provisioning server.
Valid values are enable or disable.
Default is enable.
dhcp_get_tftp Enables use of DHCP options 66 or 150 for definition of the
TFTP sever.
Valid values are enable or disable.
Default is enable.
dhcp_get_http Enables use of HTTP/S DHCP option, default 160, for definition
of HTTP/S URL
Valid values are enable or disable.
Default is enable.
https_url Defines the HTTP/S provisioning server URL
The valid value is a URL of less than 255 characters.
The default is blank.
https_opt Defines the DHCP Option for the HTTP/HTTPS server URL.
Valid values are 1 to 255.
Default is 160.
Section Field Name Description
To Next Page
Loading...
