EasyManuals Logo

Vertiv Liebert GXT5 User Manual

Vertiv Liebert GXT5
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Maintenance, Service, and Faults
The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified maintenance
personnel.
WARNING! Risk of electric shock. Even after the unit is disconnected from the mains (building wiring outlet),
components inside the UPS system are still connected to the battery and electrically live and dangerous.
Before carrying out any kind of service and/or maintenance, disconnect the batteries and verify that no current is
present and no hazardous voltage exists in the terminals of high energy capacitors such as Bus capacitors.
Only persons that are adequately familiar with batteries and with the required precautionary measures may
replace batteries and supervise operations. Unauthorized persons must be kept well away from the batteries.
WARNING! Risk of electric shock. The battery circuit is not isolated from the input voltage. Hazardous
voltages may occur between the battery terminals and the ground. Before touching, please verify that no
voltage is present!
Batteries may cause electric shock and have a high short-circuit current. Please take the precautionary
measures specified below and any other measures necessary when working with batteries:
Remove wristwatches, rings, and other metal objects.
Use only tools with insulated grips and handles.
When changing batteries, install the same number and same type of batteries.
Do not attempt to dispose of batteries by burning them. This could cause battery explosion.
Recycle or dispose of batteries properly according to local regulations.
Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may be toxic.
Please replace fuses only with the same type and amperage in order to avoid fire hazards.
Do not dismantle the UPS system.
Output Short Circuit Current
Model Max Peak for AC Mode Max RMS for AC Mode
20KIRT9UXLN 468.0 A 189.2 A (Duration: 155.3 ms)
1000IRT2UXL 13.21 A 9.375 A (Duration: 153.00 ms)
2000IRT2UXL 27.54 A 20.48 A (Duration: 172.48 ms)
3000IRT2UXL 39.92 A 28.6 A (Duration: 134.0 ms)
Table 1.1 Output Short Circuit Current
2 Proprietary and Confidential ©2024 Vertiv Group Corp. 1 Important Safety Instructions
Vertiv™ Liebert® GXT5 UPS Installer/User Guide

Table of Contents

Other manuals for Vertiv Liebert GXT5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vertiv Liebert GXT5 and is the answer not in the manual?

Vertiv Liebert GXT5 Specifications

General IconGeneral
Output Voltage200/208/220/230/240 VAC
TopologyDouble Conversion Online
Input Voltage200/208/220/230/240 VAC
Output Frequency50/60 Hz
DisplayLCD
Operating Temperature0 to 40°C (32 to 104°F)
DimensionsVaries by model
WeightVaries by model
Form FactorRack/Tower
Power Capacity1-20 kVA
Communication PortsUSB, RS-232
Waveform TypeSinewave
Input Frequency50/60 Hz
Power Factor0.9
Operating Humidity0-95% non-condensing
Battery TypeValve-regulated lead acid (VRLA)

Related product manuals