Vertiv | Liebert PEX+ Chilled Water | User Manual 19
Installation
2.2.4. Installation Tools
The following Table 2-1 shows the generic tool sets and utilities used in the installation and maintenance process.
Table 2-1 List of Generic Tools
Name Drawing Name Drawing
Electric hand drill Adjustable wrench
Slotted screwdriver Cross head screwdriver
Stepladder Forklift
Drill Wire cutting pliers
Claw hammer Diagonal cutting pliers
Insulating shoes Anti-static gloves
Electrician knife Cable ties
Insulating tape Insulating gloves
Crimping pliers Heat shrinkable tube
Insulated torque wrench Torque screwdriver
Multi-meter Clip-on ammeter
The tools mentioned in Table 2-1 are generic and commonplace; however, depending on various factors such as
site environment, local rules and regulations, cables, installation equipment, and on-site electrical connections
these tools may vary in a real- time scenario.
To Next Page
Loading...
Need help?
General
