Various components such as electrical heater, infrared humidifiers or electrode humidifier are extremely hot
during the unit operation. Therefore, allow suicient time for the unit to cool down before working with the unit
cabinet. Handle the unit with extreme caution and wear safety equipment such as protective gloves, safety
shoes, and arm protection while working with the hot compressors, discharge lines, and reheats.
There is a risk of water leaking that can damage both the equipment and the building. Eective water drain
connection and facilities should be available. Installation should be precise. Implementation of the application
and service practices should be appropriate and fault-free. Failure to comply with these norms will result in water
leakage from the unit. Water leakage can lead to massive damage and loss of critical equipment in the hosting
ecosystem. Therefore, care should be taken to ensure that the unit is not located directly above any equipment
that could sustain damage due to water and excessive moisture. Use of a leak detection system for the unit and
system supply lines are recommended by Vertiv Co.
To Next Page
Loading...
Need help?
General
